How To Remove Plastic Shower Walls

A common issue with tiled shower wall surrounds is that water can seep through the grout between the tiles. In time, the drywall backside the surround wall will go saturated and deteriorate which can promote mold growth. The best way to set up this is to remove the old wall and replace information technology. Here, our bath experts explain how to remove shower wall surround.

Tools you lot'll Need to Remove Shower Wall Surround:

Pipe Wrench
Screwdriver
Allen Wrench Ready
Material
Utility Knife
Hammers
Crowbar
Chisel
Condom Gloves
Rubber Glasses

Remove Shower Fittings:

Remove the shower head, faucets, and water handles.
If you are going to utilise a pipage wrench to twist the faucet, make sure to put fabric effectually it first to prevent scratching the stainless-steel surface.

Cut Along the Edges of the Shower Surround Wall:

Place the tip of the utility blade on the silicon caulk along the edge of the surround wall.
Sink the blade into the caulk and pull down.
Brand sure you lot cut all the manner through the caulk and the drywall underneath it.
Cut through the caulk all the style effectually the edge of the wall surround.
This includes cutting the caulk in the back corners and forth the bottom and ceiling of the shower area.

Remove the Bottom Department of the Shower Surround Wall:

Make certain you are wearing safety glasses. This part will produce a lot of debris from the drywall that tin go into your eyes.
Also make sure you vesture safe gloves. The edges on the ceramic tiles will be every bit sharp as glass and tin easily cut through your peel once the tile is broken.
Start at an edge where the surround wall meets the regular drywall.
Place the chisel then y'all can pound it in behind the get-go column of tile.
Remove the entire outset column of tiles.
Have the hammer and knock out a row of tile virtually hallway up through the wall.
Make sure to knock the head of the hammer through the tiles and drywall behind it.
Place the hook side of the hammer or the curved end of a crowbar into the opening you've created with the hammer.
Brand certain the claw part of the hammer is inserted through the holes and behind the drywall.
Gently strength the lower section of drywall off of the screws or nails belongings it to the studs by lifting the backend of the hammer handle up so the claw end pushes out against the behind of the surround wall.
Remove the bottom section once information technology is loose.

Remove the Top Section:

Reach up and gently pull the upper section away from the wall until information technology's from the screws and studs.
Take the section down and carefully set up it aside.

Remove the Back Wall:

You are going to repeat the same procedure equally the side wall.
Dial out of a row of tiles halfway upwardly the wall.
Gently tug on the wall until it pulls through the heads of the screws.
Pull it out of the tub area and set it bated.

Repeat the aforementioned procedure on the 3rd side of the wall to remove the entire shower wall surround.

And that completes our step by footstep instructions for how to remove a shower wall surround! The adjacent pace of your project would be to install a new wall and enjoy your newly renovated shower. If you need help with this project or the next steps feel free to reach out to PJ Fitz today!